antilogoboss

1. Aix Check To See If An Apar Is Installed Windows 10
2. Aix Check To See If An Apar Is Installed Home

AnswerFor example./installFixPack -b /opt/IBM/db2/V9.1.0.1./installFixPack: test: 0402-017 Specify a parameter with this command.The error can occur when you run db2setup, db2install, and installFixPack.This problem only occurs if you have installed a concluding service pack (CSP) on AIX. This can be determined by running the following command:oslevel -sIf you have installed a CSP, you will see output similar to the following:5300-04-CSPYou can work around the problem by editing db2setup, db2install or installFixPack scripts in the db2/aix/install directory.

(Do not edit the scripts of the same name in the root directory of the installation image.) For example, comment out all occurrences of 'chksysreq' and 'chksysreqpost'. This is accomplished by placing an '#' character at the beginning of lines where these system calls appear. Modified scripts are included as an attachment. These are replacement scripts for the scripts in the db2/aix/install directory. (Do not edit or replace the scripts of the same name in the root directory of the installation image.)This causes DB2 to bypass the system requirement checks.AFFECTED USERS: All users attempting to install a DB2 fix pack on an AIX operating system that has a CSP installed.

Software and patch managementSoftware management includes the tasks of installing OS, Installing other programs, Installing TLs, APARs etc.In an installable CD an OS comes as a number of file sets. These filesets once installed will have a combined OSlevel (version of OS eg: 5.1, 5.2, 5.3 etc) and a Technology level (Patch level eg: 5100-04 means TL4)Command to check the os and TL level is#oslevel –r5300-07 ( means 5.3 TL 7)Fileset is the smallest part of any installable software program or OS. The standard type of filesets AIX compatible are called bff (Backup file format) filesets. (Apart of bff format rpm packages and normal bin/cpio/tar packages are also installed in AIX like any other UNIX/Linux OS)Eg: bos.tcp.client.5.2.0.35.bffThe filesets included(installed) in our system can be listed using command#lslpp –lThe basic packaging structure is as shown below. AIX has a number of software states.

Aix Check To See If An Apar Is Installed Windows 10

When you are installing software for the first time, thesoftware will automatically install to a committed state. This means there is only one levelof that software product installed on your system.When you are installing a fix- or a maintenance- level upgrade to your system, You will be actually installing a higher version of a filesetor set of filesets. Here you have the option of installing the software either in the committed state or the applied state.The applied state allows you to maintain two levels of the software on your system. Whensoftware is installed in the applied state, the older version is saved on the disk and isdeactivated while the newer version is installed and becomes the active version.

The applied state gives you the opportunity to test the newer software before committing to its use. If it works as expected, then you can commit the software which will remove the oldversion from the disk. If the newer version is causing a problem, you can reject it which will remove the newer version and recommit the old version. APAR(Advanced Program Analysis Report). APAR’s are reports generated by IBM Software support for specific problems with specific version of filesets/softwares. For these reports there will be a set of higher version filesets invented and will be downloadable from IBM fixcentral website. The process of downloading and installing these filesets is called applying an APAR.

The APARs are given a number starting with IY or IZ normally (eg:IY85674) and the set of filesets for the solution changes depending on our servers oslevel and TL level. The installed APARs in our system can be listed using command#instfix –i.

Once you have the APAR number to be installed first thing to do is to check if the APAR is already installed in your system using instfix command(eg: #instfix -i grep IY72368)It is also possible that the APAR number is not shown because you have a much higher level of TL already installed than the TL in which this APAR was included. In that case you need to check in the IBM fixcentral site with which TL the APAR is included. Installing APAR First of all we need to confirm if the APAR is already in your system and the system's current levels.

If the APAR number is IZ64635 Run the following commands. And select menu Update Installed Software to Latest Level (Update All). Select fileset installation files location as /tmp/filesets Select COMMIT as NO Select PREVIEW as YES Then press enter This will do an installation verification and will let you know if the installation would go smooth or not. We can search for “/error” in the smitty screen to find if the installation would create any clash or dependency issue. If there is no error we can go back to previous smitty screen using F3 and select PREVIEW as NO.

Aix Check To See If An Apar Is Installed Home

This will do the actual installation.